jwhhydraulics.com

ROLL-OFF TRUCKS

John & Sons Welding

From a basic single axle unit

To a full tri-axle complete with back-rack, emergency light bar, dual chrome exhaust stacks, and stingers.



Optional "Stingers" make picking up a load easy and damage free.


The operator has full controls both inside the cab as well as on the chassis.



Mini Roll-off Hoist Specifications

Standard Features:

  • 6" bore single stage completely covered cable cyl. with 2 pulleys.
  • 5" bore lifting cyl. with 2-1/2" chrome shaft.
  • Hoist safety props.
  • 2 spool valve.
  • Pneumatic control inside & mechanical lever outside.
  • 25 gal. oil tank with strainer, return filter and side oil gauge.
  • 10" rails in channels.
  • PTO direct mounted (with standard transmission only).
  • 12 GPM pump.
  • Double wire hoses.
  • Removable hoist pins.
  • One tarp box.
  • Enamel painted (one colour).
  • Optional:

  • High performance paint.


  • 50,000 Lb Tandem Roll-off Hoist Specifications

    Standard Features:

  • 6" bore lifting cyl. facing rear.
  • 7-1/2" bore single stage cable cyl.
  • Hoist safety pins.
  • PTO mounted with P350 Commercial pump.
  • Rails in 12” channels & 5/16" upright.
  • Two-spool valve.
  • One tarp box.
  • Stabilizer equipped with safety device.
  • JWH fenders complete with two rectangular lights.
  • 55 gal. tank with inside strainer and outside filter.
  • Inside air control and outside lever control.
  • Removable hoist pins.
  • Double wire hoses.
  • Enamel painted (one colour).
  • Optional:

  • hydraulic rear stabilizer.
  • PH410 pintle hook.
  • Tail roller.
  • Stinger tail.
  • Pioneer Rack-n-pinion tarping system.
  • Donovan Hy Tower tarping system.
  • Wet line kit.
  • Front mount pump.
  • Additional tarp box.
  • High performance paint.
  • Aluminum checker plate fenders.


  • 60,000 Lb Tandem Roll-off Hoist Specifications

    Standard Features:

  • 7" bore lifting cyl. facing rear.
  • 8" bore single stage cable cyl.
  • Hoist safety props.
  • PTO mounted with P350 Commercial pump.
  • Rails in 12" channels & 5/16 upright.
  • Three spool valve.
  • JWH fenders on tandem.
  • One tarp box.
  • Stabilizer equipped with safety device.
  • 55 gal. Tank with breather cap, shut off gate valve, inside strainer and outside Gresin filter, and side oil gauge.
  • Inside air control and outside lever control.
  • Removable hoist pins.
  • Double wire hoses.
  • Enamel painted (one colour).
  • Optional:

  • Hydraulic rear stabilizer.
  • PH410 pintle hook.
  • Tail roller.
  • Stinger tail.
  • Pioneer Rack-n-pinion tarping system.
  • Donovan Hy Tower tarping system.
  • Wet line kit.
  • Front mount pump.
  • Additional tarp box.
  • High performance paint.
  • Aluminum checker plate fenders.


  • 60,000 Lb Tri-axle Roll-off Hoist Specifications

    Standard Features:

  • 7" bore single stage lifting cyl. facing front.
  • 8" bore single stage cable cyl.
  • Hoist safety props.
  • PTO mounted with P350 Commercial pump.
  • Rails in 12" channels & 5/16 upright.
  • Three spool valve.
  • One tarp box.
  • Stabilizer equipped with safety device.
  • 55 gal. tank with breather cap, shut off gate valve, inside strainer and outside Gresin filter, and side oil gauge.
  • Inside air control and outside lever control.
  • Removable hoist pins.
  • Double wire hoses.
  • Step to tarp box also included for easier access.
  • Enamel painted (one colour).
  • Optional:

  • Hydraulic rear stabilizer.
  • PH410 pintle hook.
  • Tail roller.
  • Stinger tail.
  • Pioneer Rack-n-pinion tarping system.
  • Donovan Hy Tower tarping system.
  • Wet line kit.
  • Front mount pump.
  • Additional tarp box.
  • High performance paint.
  • Lift axle.
  • Tires & rims on lift axle.
  • Fenders only on existing lift axle .
  • Difference for hot shift PTO.


  • 70,000 Lb Tri-axle Roll-off Hoist Specifications

    Standard Features:

  • 7-1/2" bore single stage lifting cyl. facing front.
  • 8" bore single stage cable cyl. with 2 pulleys.
  • Hoist safety props.
  • PTO mounted with P350 Commercial pump.
  • Rails in 12” channels & 5/16" upright.
  • Three spool valve.
  • One tarp box.
  • Stabilizer equipped with safety device.
  • 55 gal. tank with breather cap, shut off valve, inside strainer and outside Gresin filter, and side oil gauge.
  • Inside air control & outside lever control.
  • Removable hoist pins.
  • Double wire hoses.
  • Step to tarp box also included for easier access.
  • Enamel painted (one colour).
  • Optional:

  • Hydraulic rear stabilizer.
  • PH410 pintle hook.
  • Tail roller.
  • Stinger tail.
  • Pioneer Rack-n-pinion tarping system.
  • Donovan Hy Tower tarping system.
  • Wet line kit.
  • Front mount pump.
  • Additional tarp box.
  • High performance paint.
  • Lift axle.
  • Tires & rims on lift axle.
  • Fenders only on existing lift axle .
  • Difference for hot shift PTO.
  • We customize our products to fit the needs of out customers.
    Other options are available by request.

    Back to Top